Last seen: Jul 25, 2023
@softraid-support thanks for the instructions. I notice I need to click on the drive entry for the entry to become active, but I do see it now.Perhaps...
OP here: The official Apple TB2 <-> TB3 adapter has been working fine for me (iMac late 2013)
I encountered something very similar today; it turned out that I had to unmount the volume.
As a data point, I have successfully used RAID0 and RAID5 between drives of fairly different speeds.
Right, SoftRAID cannot handle this, and no stripped RAID can possibly handle this as every (sufficiently large) write must be striped to different par...
To clarify:The Seagate Archive drives apparently explicitly indicated that they are SMR; see As well, all current Barracuda drives are SMR except the ...
From a user perspective, it should be straight-forward: associate each volume with a single bit internal flag that indicates whether the last unmount ...
I was able to use the GUI to add disks to RAID1, but I was looking for examples of the command line use -- a tested example, please, as when I try it ...
So far, the app has always noticed my creating volumes at the command line... just not always noticed deleting volumes.I did unmount the volume before...
However, I once I had cancelled the rebuild, I was unable to delete the volume, not in the GUI and not in the command line. The command line would go ...
Thanks, that worked.
Is there an example?For example if I had a non-RAID volume that I wanted to convert to RAID1, how would I addisk (adddisk?)
No, when I create using the command line, safeguard is disabled by default. roberson@Sandras-iMac ~ % softraidtool volume J3 create 200gb nonraid ...