Notifications
Clear all
Topic starter
Just to be clear about my prior post: 5.8 doesn't load with SIP disabled if Startup System Security is set to Full. If Startup System Security is None, then 5.8 will load with SIP enabled.
Posted : 13/10/2019 10:15 am
Startup System Security may be a clue to getting around this issue. thanks!
Posted : 13/10/2019 4:33 pm
Startup System Security may be a clue to getting around this issue. thanks!
Just want to chime in that I am also experiencing this issue. iMac Pro with SoftRAID Lite 5.8.
Posted : 13/10/2019 7:08 pm
Startup System Security may be a clue to getting around this issue. thanks!
Using Command-R I rebooted in order to "csrutil disable" and turn System Security off. I then rebooted and the first thing I noticed was that my elegant SoftRAID icons were back on my OWC Express 4M2 and my OWC Thunderbay 6. I hadn't seen them since I moved to Catalina Beta 2 months ago. SoftRAID loaded without any hesitation or request to load the driver and life was finally back to normal.
Using Command-R I rebooted to apply "csrutil enable" and then rebooted again to discover that the icons were still there and SoftRAID loaded without any interruption.
Using Command-R I rebooted and set System Security to medium. I then rebooted and immediately noted that the SoftRAID icons had gone and SoftRAID complained when loaded that the driver had not been installed due to a bug in Catalina.
I have now simply turned off System Security and left csrutil enabled and I'm now back to a working system.
The one thing I have noticed is that throughput is down significantly. I ran a backup of my 4M2 to my Thunderbay 6 and it was running at almost half the speed that I am accustomed to.
At least I have made progress! :)
Posted : 14/10/2019 2:10 am
Startup System Security may be a clue to getting around this issue. thanks!
Just want to chime in that I am also experiencing this issue. iMac Pro with SoftRAID Lite 5.8.
Set Startup System Security to none.
That appears to fix this.
Posted : 14/10/2019 7:48 am
Softraid 5.8 is working for me with CSR enabled and System Security off. Hoping we can turn that security back on soon.
iMac Pro 10 core
Posted : 14/10/2019 9:33 am
SoftRAID 5.8 is working for me with CSR enabled and StartupSecurity set to none.
I have a MacBookPro 2018.
Hopefully You find a solution soon to give us back startup security ...
Good luck!
Posted : 17/10/2019 7:50 am
Page 2 / 2
Prev
