Henry-In-Florida
@henry-in-florida
Member
Joined: Jan 19, 2017
Last seen: Oct 25, 2025
Topics: 27 / Replies: 181
Reply
RE: Drives don't connect when plugging in the T4 cables

So having done what we could do to replicate the problem and eliminate causes of the enclosure(s) and cables in the slowdown issue and found related c...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

Samsung with Mac is a bummer! Magician doesn't run well update options don't work on MacOS 15.7 Sequoia. I did find drivers but no way to install exce...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

Right, not my issue. Checking the two drives with slow-downs tested in pair with those that work and in combination with the with slow-downs in a s...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

Forgot to include Screenshots from later test.I am verifying all the drives and finding improvement, but nowhere near your 2000MBs benchmark.

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

Tried Test #2 same conditions, just a complete restart, unplug cables at the computer end, replug, start up and retest. Results were better on Enclosu...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

@softRAID Support Near as I can come RAID 0 drives reformatted using single Volume on EACH enclosure, 2 DRIVES 1TB. Split cabling. Submitting Report...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

Split cables, but not the way you last described, may try that next. The way you describe, I will have to remove my data to reconfigure the RAID into ...

7 months ago
Reply
RE: Drives fully don't connect when plugging in the T4 cables; Speed/throughput issue(s)?

Speed (Throughput) Issue: My AJA test of the 2.5TB SATA RAID, to your standard... Writing: Starts @210MB/sec (after initially showing 400-ish for ...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

For your reference the case at "OWC Support Team" is 02868643. If you would like a copy of their emails about the issue, I can send off line. Contact ...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

@SoftRAID Support, It seems to me that your OWC departments do not communicate well. I sent OWC Support my support file assuming a HDW fault. They d...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

So I'm at a a loss right now, to diagnose this connectivity issue any further and do suspect rather strongly that it's likewise tied into a performanc...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

Your hardware folks at OWC say that there may be a "timing issue"with drives in a RAID array housed in two separated enclosures, daisy chained togethe...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

@softraid support So, I split the two enclosures with separate cables, one through the OWC (normal connection) Hub, the other straight to an open po...

7 months ago
Reply
RE: Drives don't connect when plugging in the T4 cables

Will try to dig up another longer cable to test with the split instead of daisy-chain. BTW, I've long complained about SAT RAID speed, but that is ano...

7 months ago
Page 2 / 15
close
open