SoftRAID 5.8 can no...
 
Notifications
Clear all

SoftRAID 5.8 can not be opened with SIP enabled

Page 2 / 2
(@dmbrown)
Active Member Customer

Just to be clear about my prior post: 5.8 doesn't load with SIP disabled if Startup System Security is set to Full. If Startup System Security is None, then 5.8 will load with SIP enabled.

ReplyQuote
Topic starter Posted : 13/10/2019 10:15 am
(@softraid-support)
Member Admin

Startup System Security may be a clue to getting around this issue. thanks!

ReplyQuote
Posted : 13/10/2019 4:33 pm
(@roundy)
New Member Customer

Startup System Security may be a clue to getting around this issue. thanks!

Just want to chime in that I am also experiencing this issue. iMac Pro with SoftRAID Lite 5.8.

ReplyQuote
Posted : 13/10/2019 7:08 pm
(@crhendo)
Eminent Member Customer

Startup System Security may be a clue to getting around this issue. thanks!

Using Command-R I rebooted in order to "csrutil disable" and turn System Security off. I then rebooted and the first thing I noticed was that my elegant SoftRAID icons were back on my OWC Express 4M2 and my OWC Thunderbay 6. I hadn't seen them since I moved to Catalina Beta 2 months ago. SoftRAID loaded without any hesitation or request to load the driver and life was finally back to normal.

Using Command-R I rebooted to apply "csrutil enable" and then rebooted again to discover that the icons were still there and SoftRAID loaded without any interruption.

Using Command-R I rebooted and set System Security to medium. I then rebooted and immediately noted that the SoftRAID icons had gone and SoftRAID complained when loaded that the driver had not been installed due to a bug in Catalina.

I have now simply turned off System Security and left csrutil enabled and I'm now back to a working system.

The one thing I have noticed is that throughput is down significantly. I ran a backup of my 4M2 to my Thunderbay 6 and it was running at almost half the speed that I am accustomed to.

At least I have made progress! :)

ReplyQuote
Posted : 14/10/2019 2:10 am
(@softraid-support)
Member Admin

Startup System Security may be a clue to getting around this issue. thanks!

Just want to chime in that I am also experiencing this issue. iMac Pro with SoftRAID Lite 5.8.

Set Startup System Security to none.

That appears to fix this.

ReplyQuote
Posted : 14/10/2019 7:48 am
(@phodographer)
New Member Customer

Softraid 5.8 is working for me with CSR enabled and System Security off. Hoping we can turn that security back on soon.

iMac Pro 10 core

ReplyQuote
Posted : 14/10/2019 9:33 am
(@omech)
New Member Customer

SoftRAID 5.8 is working for me with CSR enabled and StartupSecurity set to none.
I have a MacBookPro 2018.
Hopefully You find a solution soon to give us back startup security ...

Good luck!

ReplyQuote
Posted : 17/10/2019 7:50 am
Page 2 / 2
Share:
close
open