Thank you.

No. The root permissions were written when the drives were configured/formatted. The permissions written do NOT HAVE A User level permission attached ...

I improved the read/write speeds tremendously by repairing the array directory in DiskWarrior. Back to 700Mbps and 1100Mbps respectively. There we...

Showing two screen shots... The earlier one @09:58:30 is a single disk partition JBOD Volume inside the Thunderbay Mini 4 enclosure. The second@ 10:00...

Not a complaint, just lower than what you indicated. It works as advertised. I'm satisfied. And with redundancy. Wondering if I chose the correct sett...

Yes. Figured out the technique in SoftRAID and partitioned the larger disk in two halves. Then put half in the RAID volume, half in a separate non-RAI...

Results: • I got the enclosure mentioned with the SoftRAID package. • Was able to partition the 1TB as discussed: 1 @500GB JBOD and 500GB RAID Disk...

To answer your other question about Creating a 4 disk RAID 4 volume, yes you can use the remaining space as either two non RAID volumes, or create a s...

No, only one partition per disk per volume is allowed. Don't try to make a complicated setup. Just use SoftRAID as it was intended! There will b...

It seems I hijacked this thread from dougbitt. Sorry 'bout that.

OK. Trying to keep it simple and max out the speed. How about 4x 500GB SSD partition's in a RAID and I'll ignore the rest (e.g., use remaining space p...

Would a six "partition" array (two on the 1TB's, 1 on the 500GB) work better? I could optionally swap out some current, but older 500GB drives to atta...

In re-reading the thread, I see that you may mean the Striped Volume is a 1TB RAID 0 volume added/striped with the RAID 4 volume. Is this what you are...

My questions, it seems you answered it partially, was, suppose the parity drive (in this case,) the 500GB volume goes bad, can the disk(s) still be re...