Missing secondary r...
 
Notifications
Clear all

Missing secondary raid 1 disks

 DHK
(@dhk)
Eminent Member

I'm running Softraid 6.05 on Big Sur 11.3.1 which I recently transferred from an Intel. to an M1 iMac. Previously, on the Intel I got a warning that I was missing 2 secondary disks, yet the bar connecting Volumes to Disks remained green for all 3 of my Raid 1 Mirrors. This has obviously continued after transfer to M1. Do I really want to remove them? Is there any way to get them attached without removing them and re-initializing? I'm attaching a screen print of Softraid as well as the tech support report. (Sorry for older report, couldn't figure out how to remove it from post).

 

Soft Raid
Quote
Topic starter Posted : 26/05/2021 10:44 am
Topic Tags
(@softraid-support)
Member Admin

Can you save a SoftRAID Tech support file and attach it? Its better than a picture.

ReplyQuote
Posted : 26/05/2021 11:03 am
 DHK
(@dhk)
Eminent Member

I tried to attach it in the original post, but it didn't seem to happen. Let's try again.

ReplyQuote
Topic starter Posted : 26/05/2021 11:17 am
(@softraid-support)
Member Admin

@dhk

If you only have 3 physical disks, not 5, then just use the volumes command "remove missing secondary disks". This is a counter.

If you have two more off site disks, then don't, it will split them from the mirror volume.

ReplyQuote
Posted : 26/05/2021 1:06 pm
Share:
close
open