SoftRAID 6.0.3 is n...
 
Notifications
Clear all

SoftRAID 6.0.3 is not grouping drives in an Akitio Thunder3 Quad X enclosure.

(@brianbotts)
New Member Customer

SoftRAID 6.0.3 is not grouping drives in an Akitio Thunder3 Quad X enclosure.

This may be because the drives are unmatched.  Three 6TB drives are in a RAID-0 set, another 1TB SSD is independent.

Quote
Topic starter Posted : 22/04/2021 4:10 pm
(@softraid-support)
Member Admin

I have one in the office, will test it. thanks

ReplyQuote
Posted : 22/04/2021 5:44 pm
(@softraid-support)
Member Admin

I do not see anything wrong. Can you attach a SoftRAID Technical support file? thanks

 

ReplyQuote
Posted : 22/04/2021 9:22 pm
(@brianbotts)
New Member Customer

@softraid-support I may be misinterpreting the new SoftRaid 6 feature, but SoftRaid XT doesn't seem to recognize the disks as being in the same enclosure.  It lists them 100% discretely.

I emailed over the support file today.

 

ReplyQuote
Topic starter Posted : 10/05/2021 6:32 pm
(@softraid-support)
Member Admin

@brianbotts

What I see is they are "next to" each other, the SSD is not in the RAID volume, so it is not part of the RAID, but the 4 disks are adjacent in SoftRAID. We may be adding a feature to "outline" the disks in one enclosure, but there are some design challenges in doing so.

ReplyQuote
Posted : 11/05/2021 9:14 am
Share:
close
open