Clear all

Machine crashed during rebuild Causing errors on 2 drives

New Member

SoftRaid warned me about a single failing 3TB drive in my TB4 OWC Raid 5 box. I replaced the drive and SR instantly began rebuilding my drive. Amazing! I left for a couple hours and when I returned I noticed that my system was hung. No spinning beachball, just completely unresponsive! After waiting for another 30 minutes I had to do a hard restart and immediatly after that anytime I attempt to connect the RAID, SR tells me 2 of the existing drives (which were perfectly fine before the crash) now have I/O errors and the RAID will not mount nor will it rebuild the new drive (which can be ID'd in the screen cap by the low hour count compared to the others). Can someone offer some advice as to how I could recover these drives? Or am I in deeper waters than that?

Thank you!!

Screen Shot 2021 12 16 at 7.05.26 PM


This topic was modified 12 months ago by CRG
Topic starter Posted : 16/12/2021 9:04 pm
Member Admin

Attach a SoftRAID Technical Support file and I can take a look.

Posted : 16/12/2021 10:02 pm