Lets get some facts out, and be sure about this: You had a drive disappear from the card. (several times) they generally come back on line after a...

I know from supporting the OWC Accelsior there can be issues with blades. Make sure you have the blades securely inserted, these things are communi...

Well, I marked what I thought was the issue nvme blade but after moving it to another open m.2 slot, it worked fine but then after about 2 days the pr...

I pinpointed the blade that's disconnecting and moved it to another slot to see if its the blade or the m.2 slot. so far so good. I'll post back with ...

It is not SoftRAID. My guess is it is the PCI bus. Try resetting NVRAM, to see if this helps: command option pr at startup. Let us know, may...

It is not SoftRAID. My guess is it is the PCI bus. Try resetting NVRAM, to see if this helps: command option pr at startup. Let us know, may...

I built with RAID5, but the writing speed is remarkably slow. mac book pro 2019 owc thunderbay8 (8tb*8 raid5=56tb) catalina 10.15.4 softraid xt ...

Go back to Amfeltec. 12GBs is not possible. They may be getting 12-14GB using a PC, but not a Mac pro. The Mac Pro bottlenecks at about 7GB/s I pr...

In your case, disable Secure Boot. There is no solution for this. This was a decision made by the Security team at Apple and we have not yet been able...

Go back to Amfeltec. 12GBs is not possible. They may be getting 12-14GB using a PC, but not a Mac pro. The Mac Pro bottlenecks at about 7GB/s I pr...

Go back to Amfeltec. 12GBs is not possible. They may be getting 12-14GB using a PC, but not a Mac pro. The Mac Pro bottlenecks at about 7GB/s I pr...

In 10.15.x, there is unlikely to be a fix to either. The driver downgrade is because we bundle SoftRAID with Catalina, Apple's installer team decid...

I use a few of the tb2 to tb3 adapters for my thunder bays and 4m2’s and they work fine. But as was pointed out before, you’re best bet is to pay the ...