@softraid-support Is that 7 GB/s per card or max with even 5 cards?

I just wanted to give an update on my situation. I ended up removing the Amfeltec and just using the 4m2 external drive instead for a while. After a c...

@softraid-support Agreed but I already reset the PRAM to no avail. At this point I just have to swallow the $800 I spent on the card and use the 4m2 e...

No it's a SoftRAID volume. I just noticed the 5.8.4 upgrade so I'll install that and see if it makes any difference. I know it's not likely to but I'm...

So I reinstalled the Amfeltec card with the WD Black blades and disabled the option for macOS to turn off the hard drives during sleep. It worked for ...

@softraid-support ok well then this is odd because in the energy settings it was checked to "Put hard disks to sleep when possible" but the 4m2 drive ...

@softraid-support I’m confident it’s not SoftRaid at this point since it seems to work in the 4m2 enclosure. But I am curious if there is ...

@softraid-support Raid 0 on Amfeltec and now 4m2

@softraid-support I already reinstalled the OS and the issue remains. I do not have the sleep issue using the 4m2 enclosure(so far) but do with the Am...

@johnd I don't doubt this at all but I ended up moving the same blades to an external 4m2 drive via thunderbolt 3 and haven't had any issues. Would I ...

Done. Thanks a lot

1. First thing I would do is pull the Accelsior card out to get your mac booted up. then disable the security as posted previously. 2. Make sure th...