@mark5009 The disks are hanging. whether enclosure, cable or drives is unknown.What if you only connect one disk? Does it also hang? Do you have ...

@jirka Good! The only way to do it currently, is erase the volume with Disk utility.

@jirka Yes. We did not announce support for encryption yet, as we are working on adding this feature to the user interface. but encrypted volumes s...

@denverite We will be digging into this, of course.

Were you launching SoftRAID 7.0.1 from the Applications folder (or dock?), or the Monitor menu? that could be the issue. It may launch OK from the doc...

@denverite Were you launching SoftRAID 7.0.1 from the Applications folder (or dock?), or the Monitor menu? that could be the issue. It may launch O...

@desertnomad With Mirrors/RAID 10 volumes, if a primary crashes the secondary takes over. that is normal what you saw. The free space is unlikely...

@steve223 Does 7.0 behave normally?if so use that driver for now, until we can figure this out. I did not see anything like this at all during beta...

@desertnomad The forum does not accept PDF. Just attach a SoftRAID tech support file. its better in any case for me to review.

@mrfearless47 Understand. We will investigate ASAP, and worst case, release a 7.0.2, asap.

@mark5009 Disconnect your disks. Run SoftRAID 7.0. "reinstall SoftRAID driver" "Allow" OWC if prompted. Restart Connect your disks. What do ...

@dabee Try reinstalling the driver for 7.0, until we can investigate this.

@denverite I will try to reproduce this Monday. Worst case, we may need to release a 7.0.2 shortly.

@denverite Screenshots are not generally helpful. What is better is run SoftRAID without the drives and after it loads, connect the disks. Then sav...

@dabee Its in the online help, but that is out of date, so I did not point you there.