RAID 4 volume won't...
 
Notifications
Clear all

RAID 4 volume won't mount after moving disks to new hub

(@pgreen7436)
Active Member Customer

I have a RAID 4 array of 3 WD external 5TB USB 3.0 drives.  I had to move the three disks to a new hub and now it won't mount.  I have validated the disks without error.

 

Quote
Topic starter Posted : 27/11/2021 7:44 am
(@pgreen7436)
Active Member Customer

I am on an M1 iMac with Monterey release 11.6.1 (20G224)

ReplyQuote
Topic starter Posted : 27/11/2021 7:45 am
(@softraid-support)
Member Admin

@pgreen7436

New Hub on the same machine?

APFS is more difficult to diagnose, but I don't see any information in the volume header.

Did the old Hub fail or something?

ReplyQuote
Posted : 27/11/2021 10:55 am
(@pgreen7436)
Active Member Customer

@softraid-support

Same machine, different (new) hub.  Old one failed.

ReplyQuote
Topic starter Posted : 27/11/2021 12:12 pm
(@softraid-support)
Member Admin

@pgreen7436

Is it possible to connect directly? Does the volume not mount?

Its possibly the failure of the hub damaged the volume.

ReplyQuote
Posted : 27/11/2021 1:31 pm
(@pgreen7436)
Active Member Customer

@softraid-support

 

How can I recover it?

ReplyQuote
Topic starter Posted : 27/11/2021 1:38 pm
(@softraid-support)
Member Admin

@pgreen7436

Try Disk Drill. It has a free trial and may be able to recover the data.

ReplyQuote
Posted : 27/11/2021 2:28 pm
Share:
close
open